We would like to introduce the T1R magnetic oil drain bolt. Available in M14×1.5 , M12×1.25 & M20×1.5. Will work on most Honda, Toyota, Mazda, Mitsubishi & Nissan. Find out the thread pitch and order the right drain bolt for your car !

Don’t let this oil change go by without installing the T1R magnetic drain plug. Our Magnetic Oil Drain Plugs replace the rounded off OEM drain plug and are cheap insurance. Your oil filter can’t catch everything and does not ! The smallest particles are metal particles and they can wear down your engine very quickly ! Since the oil in the pan runs through the oil pump before it hits the filter (if it has one), the filter can’t really protect the pump. Stop engine damage before it can begin!

Don’t let this grit ruin your expensive engine. Our rare earth super strong Neodymium magnets (5500 Gauss) pull out the bad metal debris and hold onto it. At your next oil change, just clean these particles off with a rag. Increasing amounts of particle build-up at each oil change is your engines way of telling you it’s on the way out. A little heads up can’t hurt !

Our magnetic drain bolts come with a new crush gasket to stop leaks. The magnet is triple nickel coated for strength and durability.

- Staff  @ AJR